6 Things Boring Contractors Do Before Installing Underground Wire

 In this article, we are going to discuss the process that is applied while planning an underground wire installation. For installing wire underground, contractors make enough preparation and go through a definite procedure. The boring contractors make sure that the technicians have all the required tools and equipment to carry out the procedure of installation sufficiently. Before getting into the process, they assess the kind of project and then plan to take the required actions. Depending on the situation, site, condition of the land, and project requirements the difficulty level and approach may vary for underground wire installation. 

If you want to install a wire then you will need to contact an experienced and professional boring contractor who has skilled technicians to work on site. We are going to mention six important things that boring contractors do before any underground wire installation. So when you will hire a contractor make sure they have complete knowledge regarding all the points that are mentioned in this blog. In this way, you will be able to find a suitable boring contractor to complete your project efficiently and on time. 

6 things that the boring contractor will do…

The boring contractor will discuss it with you  

The boring contractor will visit the site 

The boring contractor will choose the cable or wire installation method 

The boring contractor will determine the required material for the wire installation 

The boring contractor will finalize the contract with you 

Arrangement for inspection 

Now let’s understand each of these tasks precisely…

The boring contractor will discuss it with you  

Professional boring contractors will always discuss with you the requirements before they get into the project directly. They will ask about all the requirements of the project precisely. They will try to find out things that are restricted while installing underground wire. The contractor will ask you about the type of project, and the type of wire that is going to be installed. In the end, they will ask you when would you like to start installing wire underground. 

The boring contractor will visit the site 

An experienced boring contractor who is serious about his work will always visit the site before installing the wires. They do this in order to determine the best route and trench for your underground wire installation. It helps to evaluate the work and the feasibility of the project. The contractor will check the terrain conditions and loads to see if it is possible to construct and maintain the underground facilities. Before digging they will make sure that you have to permit for trenching. 

The boring contractor will choose the cable or wire installation method 

The cable or wire installation method varies depending on the use, the budget, and the project. Direct buried cable/wire is considered the most common type of installation. Maybe because it is inexpensive and presents a good economical proposition. Ducted methods are more expensive comparatively and save time during underground wire installation. Surface troughs are usually used where there is no vehicle traffic. 

The boring contractor will determine the required material for the wire installation 

The boring contractors determine the required materials which are going to be suitable depending on the project and the type of installation. For example, for direct burial installation, some tools and equipment are required. To measure the distance, hammer, and other factors, certain tools and equipment are required. 

The boring contractor will finalize the contract with you 

Once the boring contractors get done assessing and evaluating all the required factors they will finalize the contract with you under some particular terms and conditions. This stage comes after sketching the proposed route which is defined by both the boring and contractor and you as a client. A contract is written during this process and then signed by the client with proper cost and estimation of required material and equipment.   

Arrangement for inspection 

This stage is considered to be the last stage before getting into the execution stage of the project. So that is why inspection is a crucial step before starting any underground wire installation. To perform these works, many authorities require permits. The inspection is important to evaluate any important point in the work like trench, conduits, structures, and street lights. The schedule of the final work gets determined in the end. 

Conclusion 

If you get to see that the boring contractor that you are going to hire has all the knowledge regarding the points that have been mentioned then think you have chosen the right person. A boring contractor with professional experience and in-depth knowledge is necessary for successful underground wire installation. You should be transparent and you should discuss thoroughly by point each and every important aspect. So hire a suitable boring contractor to complete your underground wire installation project successfully.